# Pyronix Enforcer Programming Guide
Complete programming and configuration guide for Pyronix Enforcer v10 and Enforcer v11 wireless intruder alarm systems.
## Overview
The Pyronix Enforcer is a popular wireless intruder alarm system featuring two-way wireless technology, smartphone app integration, and straightforward programming via keypad or HomeControl+ app.
## Models Covered
– Enforcer v10 (32 wireless zones)
– Enforcer v11 (64 wireless zones)
– Enforcer 64-WE (64 zones with wired expander capability)
## Prerequisites
– Installer code (default: 1111)
– Master user code (default: 1234)
– HomeControl+ app (for remote programming)
– Pyronix USB cable (for software connection)
– Bodia software (optional but recommended)
## Initial Setup
### Power Up Procedure
1. Connect transformer to mains
2. Connect battery (red to +, black to -)
3. Panel powers up with startup sequence
4. Default codes active
### Default Codes
| Code Type | Default | Change Required |
|———–|———|—————–|
| Installer | 1111 | Yes |
| Master User | 1234 | Yes |
| User 2 | Not set | Recommended |
## Programming Mode
### Entering Programming
1. Enter **INSTALLER CODE** (1111)
2. Press **PROG** button
3. Display shows "PROG MODE"
### Quick Programming Codes
| Menu | Description |
|——|————-|
| 00 | Zone programming |
| 01 | User codes |
| 02 | Time & date |
| 03 | Communication |
| 04 | Panel options |
| 05 | Output programming |
| 06 | Wireless settings |
## Zone Programming
### Adding Wireless Devices
1. Enter programming mode
2. Select **MENU 00** (Zones)
3. Choose zone number (01-64)
4. Press **LEARN**
5. Activate device (open/close contact or trigger PIR)
6. Panel confirms with beep
### Zone Type Configuration
| Type | Code | Application |
|——|——|————-|
| Entry 1 | 01 | Main door |
| Entry 2 | 02 | Secondary door |
| Guard | 03 | Motion detectors |
| Instant | 04 | Windows |
| 24hr | 05 | Panic/smoke |
| Fire | 06 | Smoke detectors |
| Technical | 07 | Freezer/etc |
### Zone Attributes
Each zone can have multiple attributes:
– **Chime**: Sounds on entry (doors)
– **Omit**: Can be bypassed
– **Part Set**: Included in part set
– **Soak**: 48-hour test mode
## User Code Management
### Adding Users
1. Enter **MENU 01**
2. Select user number (001-999)
3. Enter 4-digit code
4. Set attributes:
– Full set permission
– Part set permission
– Omit zones permission
### User Types
| Type | Code Length | Capabilities |
|——|————-|————–|
| Master | 4 digits | Full access |
| Standard | 4 digits | Set/unset only |
| Duress | 4 digits | Silent alarm |
| Guest | 4 digits | Time restricted |
### Duress Code
Important safety feature:
1. Program duress code in **MENU 01**
2. Use code ending in different digit than normal
3. Silently alerts ARC when used
## Wireless Device Management
### Signal Strength
Check wireless signal:
1. Enter **MENU 06**
2. Select device
3. View signal bars (1-5)
4. Minimum 2 bars recommended
### Device Supervision
Panel automatically:
– Checks devices every 30 minutes
– Reports missing devices
– Monitors battery levels
– Supervises jamming detection
### Battery Information
| Device | Battery Type | Life |
|——–|————–|——|
| PIR | CR123A | 2-3 years |
| Door Contact | CR123A | 5+ years |
| Smoke | Built-in | 10 years |
| External Siren | 4 x D cells | 2 years |
| Keypad | 4 x AA | 2 years |
## Communication Setup
### IP Module Configuration
1. Enter **MENU 03**
2. Select IP settings
3. Configure:
– DHCP or Static IP
– ARC IP address
– Port number (usually 3000)
– Account code
### PyronixCloud Setup
For HomeControl+ app:
1. Enable PyronixCloud in **MENU 03**
2. Note panel serial number
3. Download HomeControl+ app
4. Register with panel serial
5. Pair app with panel
### ARC Reporting
1. Enter ARC details in **MENU 03**
2. Set account number
3. Choose protocol (SIA, Contact ID)
4. Configure test calls (24hr recommended)
5. Set backup path (IP + GSM if available)
## Time and Date
### Setting Date/Time
1. Enter **MENU 02**
2. Set:
– Day
– Month
– Year
– Hour
– Minute
3. Enable automatic BST adjustment
### Auto Set/Unset
1. Enter **MENU 02-2**
2. Enable auto set
3. Set time for auto set
4. Set time for auto unset
5. Select days of week
## Output Programming
### Panel Outputs
| Output | Function |
|——–|———-|
| Bell | External siren |
| Strobe | Visual indicator |
| Panel PA | Panic alarm |
| Panel Fire | Fire relay |
### Programming Outputs
1. Enter **MENU 05**
2. Select output
3. Choose trigger event:
– Full alarm
– Part alarm
– Fire
– PA
– Tamper
– Technical
## System Options
### Entry/Exit Times
1. Enter **MENU 04**
2. Set times:
– Entry time 1: 30-45 seconds
– Entry time 2: 30-45 seconds
– Exit time: 30-45 seconds
– Siren time: 15-20 minutes
### Part Set Options
1. Enter **MENU 04-2**
2. Configure part set mode:
– Night mode (perimeter only)
– Day mode (selected zones)
– Custom mode
## HomeControl+ App
### App Features
– Remote set/unset
– Push notifications
– Zone status viewing
– Event log access
– User management
– Photo verification (with compatible cameras)
### Enabling App Control
1. Panel must have IP module
2. Enable PyronixCloud
3. Register panel on cloud
4. Download app
5. Pair with QR code or serial
## Fault Finding
### Common Fault Displays
| Display | Meaning | Solution |
|———|———|———-|
| MAINS | Power fault | Check PSU |
| BATT | Battery fault | Test battery |
| TAMP | Tamper | Check tampers |
| RF FAULT | Wireless issue | Check devices |
| JAM | Jamming detected | Investigate |
| COMMS | Communication fail | Check IP/GSM |
### Wireless Faults
| Code | Device | Issue |
|——|——–|——-|
| RF01 | Zone 1 | Device fault |
| LB01 | Zone 1 | Low battery |
| SV01 | Zone 1 | Supervision fail |
### Resetting Faults
1. Identify fault cause
2. Rectify problem
3. Enter user code
4. Press **RESET**
5. Fault clears if resolved
## Testing Procedures
### Commissioning Test
1. Test every zone activation
2. Test entry/exit times
3. Test all outputs
4. Test communication paths
5. Test app connectivity
6. Test duress function
### Weekly User Test
Guide users to:
1. Set system
2. Walk test all zones
3. Test entry route
4. Unset system
5. Check app notifications
## Best Practices
1. **Change default codes** immediately
2. **Test signals** before mounting wireless devices
3. **Label all devices** with zone numbers
4. **Document all codes** securely
5. **Set up app** for remote monitoring
6. **Register panel** with Pyronix for warranty
7. **Update firmware** when available
## Troubleshooting
### Device Won't Enroll
– Check battery installed correctly
– Ensure device not already enrolled
– Try different zone
– Factory reset device if needed
### Weak Signal
– Relocate device closer to panel
– Add wireless expander
– Check for interference sources
– Try different mounting position
### App Won't Connect
– Verify IP module installed
– Check internet connection
– Confirm PyronixCloud enabled
– Re-pair app if necessary
## Related Resources
– [Pyronix Fault Codes](/pyronix-fault-codes/)
– [Bodia Software Guide](/bodia-software/)
– [HomeControl+ Setup](/homecontrol-plus-setup/)
—
*Last updated: February 2026*
*For qualified security engineers only. Follow manufacturer instructions.*
